00492431 00487383 Gas Range Oven Igniter Replacement for Range Bake Igniter Replaces AP3674290, 00610098, 1107469, 20-01-500, 487383, 492431, 610098, AH3472541, EA3472541, PS3472541, PS8722793

Additional Details from the Manufacturer

This item information is coming from the manufacturer. Some of the details may vary from the Nellis Auction listing. Please check the Quality Rating and Notes for information specific to this listing

More features

• Part number:00492431 00487383 oven igniter replacement for gas oven replace part numbers include AP3674290, 00610098, 1107469, 20-01-500, 487383, 492431, 610098, AH3472541, EA3472541, PS3472541, and PS8722793(Not Universal) .Before placing an order for this part, please review the model fit information at the bottom of this page
• Stove igniter replacement fits models: HGS7282UC/06, HGS245UC-01, HGS246UC-01, HGS432UC-01, HGS435UC-01, HGS7282UC/08, HGS7282UC/07, HGS7282UC/01, HGS7282UC/02, HGS7282UC/03, HGS7282UC/04, HGS7282UC/05，HGS256UC-01, HGS446UC-01, HGS232UC-01, HGS252UC-01, HGS255UC-01, HGS247UC-01, HGS235UC-01, HGS242UC-01, HGS5062UC-01, HGS7022UC-01, HGS7052UC-01, HGS3052UC-01, HGS5022UC-01, HGS5042UC01, HGS436UC-01, HGS442UC-01,HGS7132UC-01, HGS445UC-01
• INSTALLATION STEPS: The igniter wire feeds through the oven to the connector on the back of the hob. Simply pull the range away from the wall to access the rear and the connection on the back is easily accessible without removing panels or plates. If you don't want to pull the range out you can splice the igniter, the factory installation method is recommended, pro tip: Tape a piece of string to the connector of the old igniter and pull it into the oven when you remove it. Attach the new ignition wires to the string, then pull the wires back into the oven and reconnect them
• Compatibility: Gas Stove Oven Ignition replacement for Thermador, and Gaggenau models，Fits Models GCR, GCT, HGS, PRG, PRL and more.Unboxing tip: Ignition components are fragile and very sensitive to contamination and should not be touched under any circumstances as they may not function properly!
• Checking a faulty igniter:Signs of a faulty igniter may include no or weak flame | delayed ignition | uneven cooking | unusual noise | visible damage | excessive build-up,Troubleshooting a gas oven igniter usually involves checking the igniter for glow or testing continuity to determine function
• Range Igniter Specifications: Overall Length:3-3/4 inches|Lead Length:10 inches|Connections:1/4 inch and 1/8 inch spade|Voltage:120V|For use with gas safety valves rated at 3.2 to 3.6 A (range to fit specific models)