1-1/2" Sanitary Waste Valve Kit, Compatible with Wavin BV1B/UB
1-1/2" Sanitary Waste Valve Kit, Compatible with Wavin BV1B/UB
Description
Installation Instructions 1. Check the Flow Direction Before installation, locate the FLOW arrow on the valve body. Always install the valve with the arrow pointing in the direction of wastewater flow—from the sink or fixture toward the drain pipe. 2. Choose the Installation Position The valve can be installed vertically, horizontally, or at an angle. For horizontal or angled installation, keep the ribbed side facing downward and maintain a slight downward slope toward the drain to ensure smooth drainage. 3. Prepare the Drain Pipe Cut the pipe squarely to the required length. Remove any burrs, sharp edges, or debris that could damage the sealing gasket or affect the connection. 4. Connect the Valve Slide the nut and sealing washer onto the pipe, fully insert the pipe into the valve connection, then tighten the nut by hand until secure. Make sure the connection is straight and properly seated. Do not cross-thread or overtighten. Important Installation Notes Do not install the valve backwards. Always follow the FLOW arrow. When installed horizontally, keep the ribs facing down to prevent standing water and ensure proper valve operation. Do not overtighten compression nuts; hand-tightening is normally sufficient for a proper seal. Do not apply pipe dope, silicone, glue, or chemical sealant to compression-type connections. Make sure all sealing washers and gaskets are correctly positioned before tightening. Install the valve in an accessible location for future inspection or cleaning. Do not push drain snakes, wires, or other mechanical cleaning tools through the valve, as they may damage the internal sealing membrane. Remove the valve before mechanically cleaning the downstream drain pipe
Item Details
Seller

Nellis Auction
Pickup Location
1402 S 40th Ave
Phoenix, AZ, 85009
Quality
Estimated Retail Price
$29.18
Buyers Premium
15%
Inventory Number
1080731204
Found in
Additional Details from the Manufacturer
This item information is coming from the manufacturer. Some of the details may vary from the Nellis Auction listing. Please check the Quality Rating and Notes for information specific to this listing
brand
Dreyoodimensions
Item: 9.3 × 6.6 × 3.0 in · Package: 0.51 lbweight
0.50 lbsMore features
- Advanced Odor Prevention: This kit features a sanitary waste valve with a self sealing membrane built from durable polypropylene material. It effectively prevents sewer odors from entering your living space, enhancing home comfort. Unlike traditional traps, it doesn't rely on water seals, eliminating risks associated with evaporation and siphonage
- Easy Installation: The size 1-1/2" kit includes a waste valve, an angled adapter, and an in line adapter, ensuring a complete setup for various plumbing needs. The rv shower drain kit is designed for straightforward integration into your system
- Space Saving Design: Designed to provide more space, this kit negates the need for a check vent. Suitable for installation in both horizontal and vertical orientations, it seamlessly fits into any plumbing environment, accommodating sinks, toilets, showers, and more, while handling hot and cold conditions with ease
- Robust Material and Enhanced Efficiency: Constructed from high quality polypropylene, this waste valve endures various temperature extremes without cracking. Its efficient design improves plumbing performance by relieving pressure and preventing system failures due to siphonage or evaporation, ensuring a reliable operation over time
- Wide Range of Applications: Perfectly suited for an array of sanitary fixtures like lavatories, bathtubs, sinks, and dishwashers, this kit promotes an enhanced plumbing experience. Whether for residential or commercial use, it ensures efficient waste management without compromising on effectiveness or convenience


See the deals
Get in on the action, thousands of new items added daily. Bid and win!
Start bidding now

