10x12 Inch Welded Blacksmith Firepot 2600F Rated Blacksmith's Welded Coal Forge for Forging Blacksmith Tools Knife Making Farrier Equipment

Additional Details from the Manufacturer

This item information is coming from the manufacturer. Some of the details may vary from the Nellis Auction listing. Please check the Quality Rating and Notes for information specific to this listing

More features

• Wide Application: The firepot is one of the most important tools in a blacksmith's workshop. Ideal for forging hammers, punches, tongs and other metalworking jobs with the help of a hand crank blower.
• Upgrade Design: The assembled firepot weighs about 40 pounds and uses with a clinker breaker, weighted ash dump, and air-inlet pipe. The ash dump/air pipe system is one piece and bolted to the firepot. Disassembled firepot require a 9/16" socket/wrench to connect the ash dump and clinker breaker.
• Firepot: Inside dimensions are approximately 10" x 12" x 3.5". Constructed entirely from 1/2" thick plasma cut plate steel, welded inside and out. The lip is 1/4-inch plate steel. Ideal for forging where there are at least a 10.5" x 12.25" rectangular hole.
• Ash Dump: 12" long, 3.5" square. It has two tabs on it for fixing two 3/8" bolts to the firepot. (Bolts included) It has a weighted ash dump door that allows you to dump coal ash fed through the clinker breaker. The air inlet pipe is 3" round (outer diameter) and 4" long.
• Clinker Breaker: Constructed from a piece of 1/2" thick steel plate with a 1/2" round steel handle. It fits in a slot in the ash dump. The round hole in the bottom of the firepot is 3" in diameter and the clinker breaker is 2.5" in diameter, leaving a 1/4" slot around it to let air from the blower into the firepot.