2 in 1 Handheld 125khz RFID Smart ID Card Duplicator, iButton Touch Memory Key Copier, Used for Rewritable T5577/EM4305 125Khz RFID Card & ibutton RW1990/RW2000/TM01

SPECIFICATION Frequency: 125Khz Power Supply: 2*AAA battery Working Distance: 0-5cm Readable Card: 125Khz TK4100/EM4100/EM4200/H-ID Proximity Card Writable Card: T5577/EM4305 Working Life: >20000 times The replicator can write RW1990 iButton and 125kHz T5577 or EM4305. Compatible with read-write TM chips: Readable TM (DS) smart chips: TM1990A, RW1990, TM01 (can only be copied once), RW2000 (if the key is blank, code needs to be written, and after writing the code, the key becomes non blank, it can be read), can be written to RW1990, TM01 (can only be copied once), RW2000 Suitable for 125kHz RFID chips: Capable of reading 125kHz RFID ID chips: EM410X/TK410X (read-only), T5577, EM4305 (if the key is blank, code needs to be written. After writing the code, if the key becomes non blank, it can be read) 【Copy RFID 125KHz Card】. Read: Place the card to be copied on the RFID sensing area and press the read key (left). If successful, the buzzer will emit a green indicator light. If the power indicator light only flashes, the card reader is faulty, and the reason may be that the card is not supported for copying. Write: After reading successfully, place the card used for coping on the RFID sensing area and press the write key (right). The yellow indicator light beeps to indicate success. If the power indicator light only flashes, the card reader is faulty, and the reason may be that the card is not available for copying. 【Copy iButton Key】. Read: Place the contact key to be copied in the TM card reading area and press the read key (left key). If successful, the buzzer will emit a green indicator light. If the power indicator light only flashes, the card reader is faulty, and the reason may be that the key cannot be copied. Write: After reading successfully, place the key used for coping in the TM card reader area and press the write key (right key). The yellow indicator light will beep to indicate success. If the power indicator light only flashes, the card reader is faulty, and the reason may be that the key cannot be used for copying.