[2025 Upgraded] BlueStars 2.0RPM Grill Auger Motor Replacement Parts for Pit Boss, Traeger, Camp Chef, Z and Nexgrill Wood Pellet Grill Smoker - Universal Barbecue Auger Motor 120V 60Hz 2 Pole

Additional Details from the Manufacturer

This item information is coming from the manufacturer. Some of the details may vary from the Nellis Auction listing. Please check the Quality Rating and Notes for information specific to this listing

More features

• 【Product Specifications】Rotating Speed: 2.0RPM | Voltage: 120V | Frequency: 60Hz | 2 Poles (𝑃𝑙𝑒𝑎𝑠𝑒 𝑐𝑎𝑟𝑒𝑓𝑢𝑙𝑙𝑦 𝑐ℎ𝑒𝑐𝑘 𝑡ℎ𝑒 𝑠𝑝𝑒𝑐𝑖𝑓𝑖𝑐𝑎𝑡𝑖𝑜𝑛𝑠 𝑜𝑓 𝑦𝑜𝑢𝑟 𝑜𝑙𝑑 𝐴𝑢𝑔𝑒𝑟 𝑀𝑜𝑡𝑜𝑟 & 𝑡ℎ𝑒 𝑓𝑖𝑡𝑡𝑖𝑛𝑔 𝑚𝑜𝑑𝑒𝑙 𝑏𝑒𝑓𝑜𝑟𝑒 𝑝𝑢𝑟𝑐ℎ𝑎𝑠𝑖𝑛𝑔)
• 【Prevent Auger Clogging】This Auger Motor drives an auger screw which smoothly feeds wood pellets from the hopper into the fire pot based on signals from the grill's control board and temperature sensor for steady heat and smoke. Compared to 1.6RPM auger motors, our 2.0RPM auger motor runs faster and reaches higher temps, which helps reduce large temperature fluctuations and reduce clogging.
• 【Superior Durability】BlueStars Grill Auger Motor ensures no cracking or stripping out for long-lasting performance. The fully-insulated electrical plugs and UL1332/18AWG wires have a reliable design with materials that resist corrosion from cooking environments like heat, oil, dust,... UL 1332/18AWG PTFE wire, equipped with sturdy plastic gears, running smoothly and without noise, the motor housing is plastic, not easy to strip, it can provide long-term service.
• 【Fit Models】The upgraded auger motor replacement for all Traeger, Pit Boss(EXCEPT PTG) and Camp Chef, Oklahoma Joe, Cuisinart WoodCreek and Cabelas Pellet Grills. Such as: Traeger 070, 075, Texas Elite Series, Pro 22, Pro 34, Lil Tex Elite Series, pit boss pro series 850, 820, pit boss austin xl, oklahoma joe rider dlx smokers, etc
• 【Not Fit】This Kit does NOT FIT Traeger PTG, Tailgater 20, Pro 575 & 780, Ironwood 650 & 885, Timberline 850 & 1300, Silverton 620 & 810, Century 885 wood pellet grills with D2 Direct Drive and WiFIRE Technology; Pit Boss 1150, Pit Boss Laredo models.
• 【Insturctions from our customer】 1) Empty wood pellet bin; 2) Unscrew the auger shim holder screw at the bottom of the bin; 3) Remove the bottom of the bin cover by unscrewing 4 screws; 4) Unplug the motor; 5) Unscrew the bolt & nut holding the auger/motor; 6) Plug in the motor; 7) Install new motor.
• 【100% Lifetime Protection】 Enjoy reliable performance with our lifetime protection, ensuring that your product will always be covered for any defects or issues that may arise.