***A LITTLE RUSTY***Powermatic Benchtop Mortiser, 3/4" Chisel, 5-1/2" Stroke, 115/230V 1Ph (Model PM701)

Product Description The PM701 Benchtop Mortiser features an in-line depth stop which allows the user to stop at preset depths without racking the mortiser bit to the base. Its heavy-duty reversible handle is so versatile that it can be changed from one side to the other quickly and easily and requires no tools to do so. The stock hold down features a specially designed double lock system. One locks from the side, the other locks from the top, to completely eliminate any slippage when removing the chisel from the work piece. This hold-down is also reversible to allow stock from 0 to 5" thick to be captured underneath it. The Powermatic 701 Benchtop Mortiser has a quick-action cam lock that will quickly lock the fence into position with one 90-degree movement. This lock also features lock nuts, so once set they will not have to be continually adjusted. Set-up has never been easier or more precise. The Powermatic 701 Benchtop Mortiser features an integrated bit and chisel spacer system. These two spacers are used to accurately and quickly account for the space needed between the bit and chisel during set-up. Large work surfaces in the table and fence allow for more stability and accurate cuts. The new mortiser also includes a large hinged chuck door with magnetic catch. This unique element allows the user to easily access the drill chuck with the standard 4" chuck key to lock the bit in place. In addition, its rack and pinion allow for simple and quick fence adjustments. From the Manufacturer The Powermatic Model 701 benchtop deluxe mortiser is powered by a 3/4-horsepower, 115-volt motor that runs at 1725 rpm and has a chuck capacity of 1/2-inch. The head-stroke capacity is 5-1/2-inches and the chisel center to fence is 4-3/8-inch with a chisel capacity up to 3/4-inch. There is an in line depth stop whichallows you to stop at pre-set depths without racking the drill bit to the base. The heavy-duty handle is reversible and can be changed from one side to the other and does not require any special tools, great for the left handed woodworkers out there. The stock hold down features a double lock system to eliminate any slippage when removing the chisel from the work-piece. The fence has a quick action cam lock to make positioning simple. Large hinged chuck door with magnetic catchallows you to easily access the drill chuck with the standard 4-inch chuck key. The fence is adjusted with by a rack and pinion system.