Ceoighe 2 Pack Photocell Sensor for Outdoor Lights, 120VAC 50/60 Hz Photocell IP54 Waterproof, Swivel Mount Photocell, Dusk to Dawn Sensor Photoelectric Switch for Back Yard Lightening

2 Pack IP54 Waterproof Photocell Sensor for Outdoor Lights, 120VAC 50/60 Hz Photocell, Swivel Mount Photocell, Dusk to Dawn Sensor, UL Certification Photoelectric Switch for Outdoor Lights, Back Yard Lightening! Rotating Photoelectric Sensor - The rotating base of the light sensor allows for adjustments to avoid interference from other light sources Light adjusting lever accommodates a variety of light levels. Easy Installation - Place the threads of the switch into the knockout hole and tighten the locknut with a rubber washer and zinc alloy. The swivel base can be positioned in the exact position to effortlessly focus the light where you need it. Compatibility - The 120 Volt Rotary Mount Outdoor Photocell with Light Adjustment Pole uses standard ½-inch threads to connect the light control with incandescent, LED, compact fluorescent, halogen, and other types of bulbs, making it ideal for controlling outdoor area lights, post lights, porch lights, patio lights, flood lights, entry lights, driveway and sidewalk lighting, and more. Specification Rated voltage value: 120VAC Rated Frequency: 50, 60Hz Rated Load: 15A, 1800W Tungsten. 9.2A, 1100VA Ballast Power Consumption: 1.5 W Max. Illumination: 10-20 Auto turn on. 3060 Auto turn off Operating Temperature: -40°C +70°C (-40°F to +158°F) Operating Humidity: 96% Wire Gauge: 16 AWG, 150ºC rated Cautions 1. When installing the switch, do not install the photoreceptor holes in the direction of artificial or reflected light. This will cause the fixture to cycle on and off at night. 2. The time delay feature in the sensor light control prevents the light controller from turning off the lights due to passing car headlights or other stray light. So it is normal for it to take a few minutes to turn off when you first install the test product.