ECCPP 2PCS Change your bolt pattern from 5x5 to 5x4.5 1 inch Conversion Wheel Adapters 5x127mm to 5x114.3mm fit for 2008-2020 for Dodge Grand Caravan| 2009-2020 for Dodge Journey-NOT FIT Stock Rims

Features

• Compatibility List Included : Wheel Spacers Adapters 5x5 to 5x4.5 Fit for 2004-2008 for Chrysler Pacifica || 2017-2023 for Chrysler Pacifica || 2008-2016 for Chrysler Town & Country|2008-2020 for Dodge Grand Caravan || 2009-2020 for Dodge Journey(-NOT FIT Stock Rims NEED AFTERMARKET WHEEL WITH 5X4.5 BOLT PATTERN)
• Installation with Confidence : NEED TO INSTALL AFTERMARKET WHEEL IN 5x4.5 BOLT PATTERN,NOT FIT Stock Rims.5 lug Wheel Adapters 1in with Thickness:1" (25mm),Vehicle Bolt Pattern:5x5 or 5x127mm,Wheel Bolt Pattern:5x4.5 or 5x114.3mm,Inner Diameter:87.1mm,Thread Pinch:12x1.5
• Excellent Driving Experience : Our 5 lug wheel spacers Adapters 1 inch 5x5 to 5x4.5 CHANGE YOUR BOLT PATTERN FROM 5x5 TO 5x4.5.Provide your car with an aggressive appearance while adding safety and stability to your car. It can effectively increase the wheelbase of the car, balance the center of gravity of the body, reduce body deformation, and solve the problems of drifting and tilting when the car is driving at high speeds and cornering at high speeds
• Little Change Huge Difference : These wheel adapters & spacers 5x127 to 5x114.3 wheel adapters make your vehicle have a more aggressive stance by giving it a slightly wider stance. And you can enjoy off-roading! Because tire spacers give your car better grip, more acceleration and better handling. And through mounting tire spacers give you more flexibility, because they allow for large brake caliper installations or lift/lowering kits
• Check before You Purchasing : 5x5 to 5x4.5 SPACERS Even if a vehicle is listed as being compatible, buyers still need to check: 1) Wheel studs are 12x1.5mm threads; 2) You have more than 1 inch of space between your fender and your wheel/tire; 3) Your factory wheel studs are shorter than 1 inch (NOTE: If your wheel studs are too long, you may need to grind/trim the stud down to fit); 4) Wheel center bore needs to be no smaller than 87.1mm,advise torque specs at 70-80 Ft/Lbs