ECCPP 6x5.5 to 6x5.5 Wheel Spacers 2 inch 6 lug 6X139.7MM Fit for Toyota for 4Runner 1996-2021 for Toyota for FJ Cruiser 2007-2014 with Studs 14x1.5 106mm Hub Side to 95.1mm Wheel Bore-2PCS

Additional Details from the Manufacturer

This item information is coming from the manufacturer. Some of the details may vary from the Nellis Auction listing. Please check the Quality Rating and Notes for information specific to this listing

More features

• CHECK BEFORE YOU PURCHASING : For this 2 inch Wheel Spacers 6x5.5 to 6x5.5,please verify the bolt count,bolt circle diameter,center bore,and bolt size match your vehicle before ordering.Enter your Year/Make/Model in system garage filter(AMAZON CONFIRMED FIT)to validate product fitment
• INSTALLATION WITH CONFIDENCE : this Wheel Spacers 6x5.5 to 6x5.5 with Thickness:2 inch| Vehicle Bolt Pattern:6x5.5 or 6x139.7mm| Wheel Bolt Pattern:6x5.5 or 6x139.7mm| Thread Pitch:14x1.5| Hub Bore:106mm Hub Side/ 95.1mm Wheel Bore | Recommended Install Torque:85-90 Ft/Lbs| Package Include:2 pcs Wheel Spacers with Thread locker glue
• SUPERIOR SAFETY AND STABILITY : Hubcentric wheel spacers 6x5.5 WHEEL SPACERS 2 inch - support and center the wheel to better resist impact loads from different road conditions and eliminate the risk of vibration.CNC automatic processing technology is used to ensure high precision and stability. The 10.9 stud can reach a tensile strength of 1000MPa, providing better structural support and safety.strict quality control, improve vehicle handling and stability, and prevent roll
• INSTALLATION TIPS FOR YOU : Please Make sure that your Vehicle hub bolts size MUST equal to this Wheel Spacers'thread pitch 14x1.5.Requires standard tire repair tools, a torque wrench, and lug socket.Check and re-torque all hardware, including open-end lug nuts securing adapter to wheel hub after some 50-100 miles
• WHEEL SPACES LUG BOLT DESIGN : While 12.9's are stronger but less ductile which is an issue in a failure scenario. Pre-installed heat treated 10.9 grade studs are more appropriate in the sense that they have higher plastic strain energy, or in simpleton terms: will tend to deform rather than snap.10.9's are more than sufficient for a car application in terms of strength and for the reasons mentioned above are more desirable than 12.9's