EMSTAR 4 Inch M42 HSS Bi-Metal Hole Cutter, Triangular Shank Hole Saw Drill Bit with Spring, for Wood, Plywood, Plastic, Gypsum Board, Thin Metal Sheets
EMSTAR 4 Inch M42 HSS Bi-Metal Hole Cutter, Triangular Shank Hole Saw Drill Bit with Spring, for Wood, Plywood, Plastic, Gypsum Board, Thin Metal Sheets
Description
Feature: BETTER CENTER DRILL BIT:The center drill bit is higher quality, sharp with split tip, it can drill the holes very fast. and stronger. SHARP SAW:The sharp teeth is HSS M42 Bi-metal saw,it can open hole in shorter time with neat opening. OPERATION:The shank is 3/8 inch, it is good for most of the hammer drill.Please be sure to tighten the thread between arbor and hole saw when assembling. Advantage: 1.Sharp and strong to make holes on all kinds of wood,metal 2.This 4 inch hole saw is cheap and cost-effective. It can finish the work with as little money as possible Notice: 1.When starting drilling,please firstly cutting at a slow speed, after the teeth go into the material,then use the normal or high speed. 2.The hole saw is sharp, so it is dangerous,please be careful,and not let children touch it. and please be sure to tighten the arbor with hole saw.
Item Details
Pickup Location
4031 Market Center Dr Suite 303
North Las Vegas, NV, 89030
Quality
Auction closes
June 21, 2025 at 1:07 AM
brand
EMSTAREstimated Retail Price
$7.72
Buyers Premium
15%
Inventory Number
1041813145
Features
- 【Sharp and Durable】The hole saw is Bi-metal construction, which has special flexible steel saw body and high speed steel cutting teeth, with longer service life, and more sharp
- 【High Work Efficiency】The hole saw features sharp and sturdy cutting edges, with the center drill made of M42 steel providing higher hardness and heat resistance; This ensures a sharp cutting edge, improving work efficiency and precision
- 【Easy to Use】Pass the pilot drill bit of arbor through the center circular hole on the back of the hole saw, and rotate the arbor until it is tightened
- 【Wide Application】The hole saw can be widely used for cutting thin metals, wood, plater board, plywood, duct, drywall, soft plaster, corn hole boards and plastic, good enough for the average DIYer and professional project
- 【Package Content】Including 1pcs x 4 inch hole saw, 1pcs x arbor with drill bit and spring. The shank of arbor is for 3/8' drill chuck and bigger
Getting Started
Learn more about bidding, winning, pickup, and more on our video tutorials page.
Visit Video Tutorials