Exceedhub E-Bike Hydraulic Disc Brake Set, 2-PIN 2-Pistons Electric Power-Off Hydraulic Brakes Set, Left Front 950mm Right Rear 1880mm Pre-Bled with Mineral Oil Brakes Kit for eBike, MTB, Scooters

Additional Details from the Manufacturer

This item information is coming from the manufacturer. Some of the details may vary from the Nellis Auction listing. Please check the Quality Rating and Notes for information specific to this listing

More features

• 【2-Piston Brake】Hydraulic Disc Brake Set Features with a 2-piston brake, which makes the dual-side breaking force evenly and also increase the breaking force by 30% and the pads lifetime by 150%
• 【Electric Bike Brakes Size】The hydraulic brake lever features a spiral adjustment function, The front brake hose length is 950mm (37.40in), and the rear brake hose length is 1880mm (74.02in). Ensure hassle-free installation by confirming the required hose length before purchasing. Perfect for all mountain bikes, electric ebike, scooter, folding bike, fat bike etc
• 【Sensor Control System】Use detachable power-off sensor, the sensor receives a signal when braking and cuts off the power output of the motor to ensure safe riding, Use 2-pin waterproof connector. 【Hint】Check the wiring port is matched
• 【Compatibility】This brake system is designed for E-bikes/scooters with left-side brake rotors and is not compatible with those featuring right-side brake rotors. Brake types are front brakes are left hand controlled and rear brakes are right hand controlled
• 【Massive Stopping Power】Compared to traditional brakes, Hydraulic systems can convert smaller forces into larger braking forces. Due to the characteristic of fluid transmitting pressure, the operation of hydraulic brakes is smoother and more precise. Hydraulic systems can transmit braking forces over longer distances, reducing brake response time. Ideal for trail riding, downhill, choppy mountain, snow, beach, flat road etc
• 【Installation Instructions】Make sure the calipers and pads correctly fitted to the hub and aligned with the disc. Adjust the clearance and fine tune the brake adjustment screws to ensure good braking without clicking. Exhaust the hydraulic disc brake system to maintain optimum performance. Pull the brake handle to test if the brakes are contacting the disc to make sure the braking effect is normal