FLIPSKY Dual Electric Speed Controller for Skateboard FSESC6.7 140A Base on VESC6.6 with Aluminum Anodized Heat Sink
FLIPSKY Dual Electric Speed Controller for Skateboard FSESC6.7 140A Base on VESC6.6 with Aluminum Anodized Heat Sink
Description
Warm tips:It is recommended to keep firmware 5.2 from factory ship, the new firmware upgrade may damage the ESC. Specs: Firmware: Latest Version. Continuous current: 140A; instantaneous current: 400A Voltage: 14V-60V(Cells: 4-13S; safe for 4S to 12S, voltage spikes may not exceed 60V! ) BEC: 5V@1A ERPM: 150000 Control Interface Ports:USB,CAN,UART,SPI, IIC Supported Sensors:ABI，HALL，AS5047，AS5048A Input Set Support:PPM, ADC, NRF, UART Modes:DC, BLDC, FOC (sinusoidal) Regenerative capacity: Yes Programmable: Yes Motor wire: 12AWG Power cable:14AWG (with XT90 connector) Size:79.8*66.8*17.8mm Feature: Support four control modes: Current/Dutycycle/Speed /Position control mode. Protection functions: low voltage protection, high voltage protection, over-current protection, temperature abnormally protection, mosfets over-temperature protection. Support the function of balancing car by connecting the IMU module through the IIC interface; support inertial measurement unit modules such as MPU9250, MPU9150, MPU6050, LSM6DS3, BMI160.
Item Details
Seller
Nellis Auction
Pickup Location
4000 Meadows Ln
Las Vegas, NV, 89107
Quality
Auction closes
-Estimated Retail Price
$168.24
Buyers Premium
15%
Inventory Number
1081153472
Found in
Additional Details from the Manufacturer
This item information is coming from the manufacturer. Some of the details may vary from the Nellis Auction listing. Please check the Quality Rating and Notes for information specific to this listing
brand
FLIPSKYcolor
Blackdimensions
{"package":{"weight":231,"width":128,"length":163,"height":37}}More features
- More Control Modes:Support four control modes: Current/Dutycycle/Speed /Position control mode.
- Upgrade Performance:Latest Version Firmware,support rich control interface and sensors,programmable.Warm tips: It is recommended to keep firmware 5.2 from factory ship, the new firmware upgrade may damage the ESC.
- Support the function of balancing car by connecting the IMU module through the IIC interface; support inertial measurement unit modules such as MPU9250, MPU9150, MPU6050, LSM6DS3, BMI160.
- Continuous current: 140A; instantaneous current: 400A.Voltage: 14V-60V(Cells: 4-13S; safe for 4S to 12S, voltage spikes may not exceed 60V! ).
- Size:79.8*66.8*17.8mm.Widely applications:e-skateboard,ebike,scooter,robot etc.
- Top Service: If there are any question or need help , just feel free contact us , we will always here help you out within 24 hours.
Getting Started
Learn more about bidding, winning, pickup, and more on our video tutorials page.
Visit Video Tutorials