FocusFoto USB-C Type-C to Full Decoded LP-E17 Dummy Battery DR-E18 Coupler Power Adapte Spring Cable for Canon EOS R8 R10 RP 77D 200D Mark II 250D 750D 760D 800D 850D?Rebel T6i T6s T7i T8i SL2 Camera

Introduction: The USB-C PD system can replace traditional AC adapters or heavy grips or batteries, it allows you to power your camera using the external powerbank/charger with USB 3.1 Type-C output to achieve long time shooting, no need to replace camera battery again and again. Connect the USB-C Type-C plug to power source and put the coupler into the camera battery compartment to provide stable and continuous power supply for your camera. The adapter cable is designed with voltage conversion circuit and circuit protection. Full decoded, support to display the battery status. Spring cable, very convenient and easy to use and pack. No more interrupt during the shooting. Straight length 35cm, extended length 1m. Applicable power supply: power bank and mobile power bank with PD 9V protocol output. Compatibility: For Canon EOS R8、R10、RP、77D、200D、200D II、250D、750D、760D、800D、850D；Rebel T6i、T6s、T7i、T8i、SL2...Camera（Not Suit for M3、M5、M6） Features: Model: LP-E17-Type-C Decoded Type: Full Decoded Input: PD USB-C 9V/2A Output: 8.4V 2A Length: 35-100cm Net Weight: 50g Package includes: 1 x USB-C to LP-E17 DR-E18 Dummy Battery Power Adapter with Spring Cable Instructions: Please use the power bank/charger with PD 9V/12V protocol output. Firstly, plug the Type-C charging cable into the power bank/charger. Finally, install the dummy battery into the camera battery compartment and close the battery lid. Please follow the installation sequence when using it, otherwise some cameras will not turn on. (Kindly note: If the installation sequence is reversed and the camera does not turn on, just take the dummy battery out of the camera compartment and reinstall it to turn it on ).