Garbage Disposal Air Switch Kit Sink Top Waste Disposal Long Stainless Steel Brushed Nickel On/Off Air Button Food and Waste Disposals Part by Etoolcity

Pls Note: This air switch is stainless steel brushed nickel. Etoolcity Single Outlet Stainless Steel Brushed Nickel Air Switch Kit Let You Deal with Sink Garbage Easier. It is a convenient alternative to the traditional wall switch and a perfect fit for most brand or model of garbage disposers(<2HP). Tips: must have AC power below sink. Also it is connection device as a part of garbage disposal, massage chair, or vacuum. 5 easy steps to install Step 1: If there is no sink hole, you can mount the push button through the counter top by drilling a hole (not less then 1-1/4 in). Step 2: Place the rubber gasket between push button and the top of sink counter. Tighten the plastic nut under the sink counter to ensure a watertight seal. Step 3: Attach the air tubing between the push button and the control unit. Push the tubing tightly onto the molded protrusions. Step 4: Plug the control unit into a dedicated, grounded 120V AC outlet that is continuously powered. Step 5: Plug the disposer power cord into the control unit. Press push button to ensure that the countertop switch turns the disposer on and off. NOTE: ▲Press switch button to turn the disposer on and press again to turn the disposer off. ▲Disposer may start when disposer cord is plugged into the power module. Push the Countertop Switch button once to stop the disposer. Specifications: ●Working voltage: AV110-240V(50/60Hz) ●Working current: 110V/16A; 220V/10A ●Max power: 2000W Package Included: ●1x Single outlet power module ●1x Long(2.7'') Stainless steel brushed nickel push button ●1x 1 m/3.3ft Soft Tube ●2x Mounting screws ●1x Installation instruction ●1x Strong nano-markless hook sticker