HAOLEDI 6.69'' LED Ceiling Fan Light Retrofit Kit 25W 3000LM Ceiling Light Replacement PCB Board 5CCT 3000K 3500K 4000K 5000K 6000K Adjustable 120V CRI90 Dimmable (25, watts)

LED Ceiling Fan Light 25 watts Outside Diameter: 16cm/6.69inch Lumen: 3000LM FOR 20-25 Square Meter ROOM Driver : Input AC120V 50/60Hz Light temperature :5CCT - 3000K 3500K 4000K 5000K 6000K Control by Triac Dimming switch for dimming or a conventional switch for turn on and off . Packing 1x led ceiling fan light retrofit panel with driver on the panel. 3x Magnets 2x 25cm wires 1x Wire Connector 1x User Manual Easy Installation Step1. Cut off the power supply. Step2. Remove the light source and BALLAST(Our LED fan light retrofit panel has driver on the board and just connect 120V AC directly , no extra external AC and DC driver needed ). Step3. Choose one method suitable for your fixture.(with magnets or screws) Step4. Connect wires with wire connector,positive to positive and negative to negative. Here's how to confirm if you can use this led ceiling fan light retrofit light kit . 1. take off the light cover and measure the light base to make sure the light base plate's outside diameter is larger than the 5.12inch . 2 .check if the original light base plate is iron or can you use screws to fasten the light retrofit kit .