JEEJINYAN Whipped Cream Charger Pressure Regulator Valve, for 0.95L/580G Tank, for Pressure Regulator Tank & Hose Line on Dispenser

Specification: ● Material: Metal Package contents: ● 1 × pressure reducing valve(6.5 cm × 14 cm) ● 1 × plastic hose ● 1 × connector The usage steps are as follows: 1. Prepare tools and materials: You will need a pressure regulator, a cylinder, a pressure gauge (if the regulator does not have a built-in pressure gauge), and corresponding connecting pipes. 2. Check the equipment: Make sure the pressure regulator and connecting pipes are not damaged or leaking. If any problems are found, do not use the device 3. Connect the gas cylinder: Connect the cylinder to the pressure regulator. Make sure connections are tight to prevent gas leaks. 4. Adjust the pressure: If the pressure regulator has a built-in pressure gauge, you can adjust the pressure directly by looking at the pressure gauge. If there is no built-in pressure gauge, you can use an external pressure gauge attached to the regulator. As needed, adjust the pressure knob or valve to bring the pressure to the desired value. Precautions: 1. Before using the pressure regulator, make sure you understand the relevant safety procedures and instructions for use. 2. During operation, be sure to wear appropriate personal protective equipment such as gloves and glasses to prevent accidental splashes or leaks. 3. When adjusting the pressure, operate carefully and avoid over-adjustment or sudden pressure release to avoid danger. 4. Regularly check the status of the pressure regulator and connecting pipes to ensure they are working properly and are not damaged or leaking.