Lichamp 6-Pack Seal Self Fusing Rubber Tape for Electric Cable Splicing and Pipe Water Leak Repair, 1-inch x 10-feet x 6 Rolls

***IMPORTANT: These self fusing tape are completely non-sticky themselves. they fuse to themselves after applying pressure. Remove the isolation layer, then place the tape on the problem area, hold firmly and stretch (WITH TENSION) around the object and wrap over itself to fuse. *** Instructions: 1 ) Dry the substrate before applying the tape. Place the tape on the problem area, hold firmly and stretch (WITH TENSION) around the object. 2 ) Continue to stretch the tape, overlapping each layer by 1/2" and wrap over itself to fuse. 3 ) Wrap completely over the problem area and cut the tape once finished. Press the end firmly into place. 4 ) To remove, carefully cut with scissors or knife. Applications: Plumbing repairs Garden hoses & tubing Outdoor antenna coax connector weather sealing Electrical cable repair & insulation Outdoor extension cord & lighting connector protection Automotive & RV hose repairs Marine applications Tools, sporting good & handlebar grips Specifications: Color: Black Thickness: 30 mil Width: 1 inches Length: 10 feet x 6 rolls Operating Temperature Range: -10C to 100C (14F to 212F) Specific gravity: 1.20 ± 0.03 Shore a durometer hardness (room cured - 24 hours): 55 ± 5 Tensile strength: 700 psi min Elongation: 300% min Tear strength: 60 ppi min Bond strength 2 lbs. min Cold brittle point: -54C (-65F) Water absorption (by weight): 5% max Dielectric strength: 400Vpm min Dielectric constant, 1kH3: 2.95 Dissipation factor, 1kH3: <0.0004