*MINOR DAMAGE - USED* UniTak3D PEI Build Plate for Bambu Lab P2S/P1S/P1P/X1C/X1/X1E/A1 3D Printers,257x257mm Double Sided Smooth&Textured Heated Bed,Spring Steel Sheet,High-Adhesion Removable Flexible Printing Surface

Additional Details from the Manufacturer

This item information is coming from the manufacturer. Some of the details may vary from the Nellis Auction listing. Please check the Quality Rating and Notes for information specific to this listing

More features

• 【Superior Adhesion】Bambu lab A1 PEI plate is coated with black textured PEI,Its adhesion is stronger than that of the gold PEI coating,allowing the model to be firmly attached to the surface of the printing plate without the need for glue
• 【Easy to Remove】The smooth PEl makes the bottom of the printed model very smooth,and the model can be removed easily without bending the spring steel sheet
• 【High Temperature Resistance】Genuine PEI powder coating is heat resistant.PEI textured side is resistant to 300℃ and PEI smooth side is resistant to 200℃.And it can print with most filaments,such as PLA/ABS/ASA/PETG/TPU/Nylon/PA/PC
• 【Application】Double-sided smooth+textured PEI plate fit 3D printers with a platform size of 257*257mm,compatible with Bambu Lab A1/P2S/P1P/P1S/X1/X1C/X1E
• 【Warm Reminding】PEI smooth side requires 3D printing glue sticks to prevent the model from falling off,except for PLA filaments.Please peel off the protective film on the smooth PEI side before use
• 【Kind Reminder】Please level the plate again before you change to another side to print;Please wait until the platform has cooled down before removing the model to avoid damage to the surface of the platform;Please clean the surface regularly with a soft cloth.Do NOT wash or clean the PEI with any strong chemical reagents or strong detergents.
• 【Support Service】If you have any question or need support about the double sided smooth&textured heated bed, please contact me via Amazon, we will respond with 24 hours