Marsrock 1000W Grid Tie Solar Inverter with Power Limiter LCD Dispay Converts 45-90V DC to 110V/240V AC Auto Switch Perfectly Suitable for US Standard 1/2 Phase Grid

Features

• 【Input Specifications】Marsrock 1000W Grid-Tie Inverter requires a DC input ranging from 45-90V. Ensure that the solar panel power is no less than 200W and that the Voc lies within the range of 45-90V.
• 【Battery Compatibility】This inverter is compatible exclusively with 48V battery banks. When deploying battery power, it is mandatory to utilize a circuit breaker. The inverter incorporates a battery discharge power mode, which intelligently adjusts the discharge depth according to the battery bank’s condition.
• 【Advanced MPPT Technology】Employing state-of-the-art Maximum Power Point Tracking (MPPT) technology, the inverter achieves an efficiency of up to 99% and a peak conversion ratio of 80%. For optimal performance, it is essential to use solar panels of uniform specifications. The inverter includes a limiter sensor that delivers only the necessary power to the load, and the controller wiring should not exceed 66 feet in length.
• 【LCD Interface】The inverter’s LCD display provides comprehensive monitoring, including daily and total power generation, real-time grid waveform, current solar system voltage and current, instantaneous power, internal temperature, as well as date and time. For applications requiring higher power, this grid-tie inverter supports stacking; using four such inverters in a stacked configuration equals a 1000W capacity per unit, achieving a combined output of up to 4000W with no maximum stacking limit.
• 【Output Connection Guidelines】This grid-tie inverter should only be connected to a grid output and is not designed to directly power AC loads. Ensure accurate and secure connection of the positive and negative terminals and tighten the DC terminals to prevent loosening and potential short circuits. The inverter should not be connected to a solar controller’s load port.