*Missing Parts* Professional Acrylic Plexiglass Sheet Cutter Scoring Knife Tool,With a Curved Handle,It Is More Convenient To Use.One handle,11 blades.(Yellow)

Additional Details from the Manufacturer

This item information is coming from the manufacturer. Some of the details may vary from the Nellis Auction listing. Please check the Quality Rating and Notes for information specific to this listing

More features

• This acrylic hook knife tool is specially used to cut acrylic sheets or other plastic sheets. Acrylic sheets or other plastic sheets are hard and brittle, so it is difficult to divide. This hook knife can help you carve a thin groove on the acrylic sheet, and then you can break the acrylic sheet along the groove.
• 1.Please mark the board with a pen,then use a ruler to place it according to the mark.2.Use the hook knife to draw a groove on the acrylic plate along the ruler,and the ruler must be pressed with your left hand. Hold the hook knife with right hand and repeat the operation to make the groove deep enough.
• 1.There is a ridge-like protrusion on the back of the hook knife. Place the hook knife under the acrylic board, align the protrusion of the hook knife with the groove just hooked out,and press down on both sides of the groove with both hands,Let a small part of the acrylic board split along the groove.2.Completely break the acrylic board along the groove.
• When using the hook knife,pay attention to protect the tip of the knife and do not touch the ground. If the tip of the knife is not sharp, you can change the blade.Contains a hook knife with 1 blades and a box of blades. There are 11 blades in total.
• If you are not familiar with the usage of this tool, it is recommended that you carefully read the above instructions on how to use it, as well as the cutting demonstration video.
• Contains a hook knife with 1 blades and a box of blades. There are 11 blades in total.