Motoforti 4pcs 195500-1970 B6S713250 Fuel Injector for Mazda Miata 1.6 1990-1993 for Ford Probe Base, GL 2.2L 1990-1992 for Mazda 929 Base, S 3.0L 1990-1991 Long-lasting

Description: Direct replacement of your old injector and no modification needed. The good impedance fuel injector has been tested and exactly matches the internal coil resistance and fuel flow rate of OEM fuel injector. This is a non-OEM product, accessory only! Specification: Material: Metal, Plastic Color: Silver Tone Voltage: DC 12V OE Number: 195500-1970, B6S713250, FO2Z9F593B Flow Rate at 43.5psi/3 bar, 20.2Lb/hr, 152.4G/min, 212cc/min Pin Number: 2 Dimension: 7.8x3.8cm / 3.07''x1.50''(L*W) Fitment: for Mazda MX-6 DX, LX 2.2L I4 1990-1992 for Mazda MX-6 Base, M Edition 2.0L 2.5L 1996 for Mazda Miata 1.6 I4 1990-1993 for Mazda 929 Base, S 3.0L V6 1990-1991 for Mazda 626 DX, LX 2.2L I4 1990-1992 for Ford Probe Base, GL 2.2L I4 1990-1992 for Mazda MX-3 Base 1.6L I4 1994-1995 Note: This installation should be done by an experienced mechanic who has access to a factory manual and all required tools! Installation: Step 1. Make sure the engine is cool down. Disconnect the battery. Step 2. Remove the bolts and brackets from the fuel rail. Step 3. Disconnect the plug on each injector. Step 4. Lift the fuel rail and remove the injector from the fuel rail. Step 5. Press the new injector into the rail. Reattach the fuel rail and put the injectors in their respective holes. Step 6. Bolt down fuel rail. Reattach fuel line. Plug in injector connectors. Reconnect battery. Step 7. Double check for fuel leaks before and after starting the engine. Product Included: 4 x Fuel Injector