Olivechard for iPhone 14 Pro Max Soft OLED Screen Replacement 6.7" 120Hz Promotion Display Assembly with Proximity Sensor Flex Cable Touch Screen Digitizer Repair Kit A2894 A2651 A2893 A2895 A2896

Olivechard Soft OLED Screen Replacement for iPhone 14 Pro Max 6.7" This replacement screen assembly is designed for iPhone 14 Pro Max front display repair. It is an aftermarket Soft OLED display assembly with touch screen digitizer and proximity sensor flex cable, intended for repairing cracked glass, black screen, display lines, dead pixels, flickering, pink screen, ghost touch, or touch response failure. This version is designed to support 120Hz ProMotion after proper installation and device recognition. 📱 Compatible Model Family Compatible model family includes A2894, A2651, A2893, A2895, and A2896. Please confirm your exact model before purchase. This screen is made for iPhone 14 Pro Max 6.7-inch only and is not for iPhone 14, iPhone 14 Plus, or iPhone 14 Pro. ✨ Best Fit Buyer Scenario This screen is suitable for buyers who need to restore a damaged iPhone 14 Pro Max after front display failure. It is a strong repair choice for personal repair, repair shops, refurbishing work, resale preparation, backup phone recovery, and daily-use restoration where display output, touch response, 120Hz smoothness, and sensor-flex convenience are important repair needs. It is especially suitable for buyers who want a higher-grade replacement than TFT LCD or InCell screens, while still understanding that this is not an original manufacturer display. 🎯 120Hz ProMotion Support Notice This Soft OLED version is designed to support 120Hz ProMotion after correct installation and device recognition. 120Hz behavior may be affected by phone system condition, display settings, app behavior, cable connection, installation quality, and device recognition. Please test scrolling smoothness, touch response, and display stability before final sealing. If refresh behavior, touch response, or display output is abnormal during testing, do not complete installation. Disconnect the battery, reseat the flex cable, inspect the connector, and contact support with photos or video before sealing the phone. 🔍 Soft OLED vs Other Replacement Types This replacement uses Soft OLED material with a flexible display structure. Compared with TFT LCD or InCell replacement screens, Soft OLED usually provides deeper black levels, stronger contrast, better color depth, thinner structure, and lower display-class compromise. Compared with Hard OLED, Soft OLED generally has better flexibility and can offer a closer fit feel during installation. Compared with the factory display, buyers may still notice differences in brightness balance, color tuning, True Tone behavior, edge-viewing feel, touch feel, or overall display experience. These are normal considerations for aftermarket repair screens. 📦 Proximity Sensor Flex Cable Notice This assembly includes the proximity sensor flex cable to reduce upper small-part transfer work during repair. The assembly does not include the original TrueDepth camera module or Face ID hardware. Face ID depends on the phone’s original components remaining intact, undamaged, and correctly installed. Do not wipe, scratch, bend, or damage the original front camera / TrueDepth area during repair. If the original Face ID-related components are already damaged, this screen will not repair those unrelated faults. 🧰 Package Contents Package includes: 1 x Soft OLED screen assembly for iPhone 14 Pro Max 1 x proximity sensor flex cable included on assembly 1 x waterproof adhesive seal 1 x repair tool kit 1 x screwdriver set 1 x pry tool kit 1 x dust removal sticker Tool contents may vary slightly by batch. The included tools are basic repair assistance tools; professional tools may still be needed depending on the repair condition. 🔌 Installation and Testing Notes Before final installation: power off the phone completely disconnect the battery flex cable from the motherboard connect the replacement screen for testing first verify display output test touch response across the full screen check brightness and color behavior test scrolling smoothness and refresh behavior check proximity sensor behavior during call simulation confirm Face ID still works with original components if needed complete final sealing only after all functions are confirmed Do not remove protective films or complete adhesive bonding until the screen passes testing. Do not press hard on the OLED panel, bend flex cables sharply, or force connectors into place. Professional installation is strongly recommended for buyers without screen repair experience. 💬 Support and Return Reminder Please inspect and test the screen before final installation. If the item arrives damaged or if display, touch, refresh, sensor, or color issues appear during pre-install testing, contact support with clear photos or video before completing the repair. Installation damage, torn flex cables, pressure marks, connector damage, wrong model selection, or sealing the phone after failed testing are not considered product defects. FAQ Q: Is this better than TF