** SOLD AS IS NO REFUND/RETURN ** SEE COMMENTS! LE LEMATEC Portable Sand Blaster Gun Kit for Rust Removal, Glass Etching, & spot blasting - Requires 150PSI Air Compressor 4+ CFM for Detail Work & Small Projects - Ceramic Nozzle Blue

Additional Details from the Manufacturer

This item information is coming from the manufacturer. Some of the details may vary from the Nellis Auction listing. Please check the Quality Rating and Notes for information specific to this listing

More features

• CRITICAL AIR SUPPLY REQUIREMENTS: This tool is pneumatically demanding. It requires a minimum continuous airflow of 4 CFM at 90 PSI to operate. DO NOT USE with pancake compressors or small tanks under 5 gallons, as they cannot sustain the necessary volume, leading to immediate pressure drops and clogging. For best results, use a 5.0 HP compressor or larger.
• OPERATING PRESSURE & PREP: Rated for 90 PSI Operating Pressure (Max 150 PSI). Features a standard 1/4" NPT air inlet. MANDATORY: Your air supply must be clean and bone-dry. You must use an inline moisture filter/water trap; otherwise, moisture will cause abrasive media to clump inside the gun, resulting in blockage and stoppage.
• GRAVITY-FED SPOT BLASTER DESIGN: This is a lightweight, gravity-fed system designed specifically for precision detail work, small area rust removal, and glass etching (e.g., automotive calipers, engine parts, DIY crafts). NOTE: It has a limited hopper capacity and is not intended for large-scale projects like stripping full car bodies or large frames.
• MEDIA COMPATIBILITY GUIDE: Optimized for use with abrasive grit sizes between #46 and #100. Compatible media includes dry Aluminum Oxide, Silicon Carbide, Glass Beads, and fine Walnut Shells. Do not use coarse media larger than #40 grit, as it will clog the nozzle feed.
• INDUSTRIAL DURABILITY: Built for the shop environment with a high-impact ABS housing and a ceramic nozzle. The simple gravity-feed mechanism minimizes moving parts for easy field serviceability. Kit includes the blaster gun and one ceramic nozzle tip (Air hose and abrasive media sold separately).