Taidacent Automatic Water Level Controller - Two Non Contact Water Level Sensors, 1 Meter Cable, Fills or Empties Tanks

Features

• When the liquid level of the container is too low, the low liquid level alarm signal from the low liquid level sensor is triggered to trigger the controller to close the relay to start the water pump to add liquid level. When the liquid level reaches a certain height, the high liquid level sensor sends a signal to trigger the controller to disconnect the relay to automatically stop the water pump. You can use the controller to either to fill or empty a tank
• AC95 ~ 265V wide voltage power supply.
• Relay dry contact output, can be applied to a variety of load.
• Control diversification, can control the pump in manual or automatic mode.
• You can adjust sensitivity: Remove the plastic cover of the sensors and turn the very small screw, clockwise decrease sensitivity, counter clockwise to increase the sensitivity.