Water Repair Clamp for 1/2 inch Pipe(Outer Diameter of The Applicable Pipe is 0.79-0.84 inch),Leak Sealer for Pipes and Plumbing,Length About 4 inch,Suitable for PE/PPR Pipes,Steel/Iron Pipes

Features

• The outside diameter of a 1/2 inch pipe is not 0.5 inch,please check the details of the item.Pipe Repair Clamp is composed of 2 steel plates,2 rubber liners for sealing and 6 bolts.Working pressure up to 1Mpa(10 bar).Compared with other pipe repair clamps,it has better sealing effect and higher pressure,and both sides are connected to make the pressure more even.this is a big pipe clamp, please read the description, check its size and the space around your pipe.
• The outside diameter of a 1/2 inch pipe is not 0.5 inch,it is suitable for pipe diameter:about 0.79-0.84inch(20-22mm),“1/2inch” is just a standard code.The length of the 1/2 inch pipe repair tool is about 100mm (4 in),the maximum width is 83mm, it is suitble for steel pipe/iron pipe/stainless steel pipe and PPR/PE pipe.
• Pipe repairer is suitable for cast iron pipe,cement pipe,PVC pipe,PE pipe,etc.easy and convenient to use,no need to stop the water,no need to cut the water pipe,it saves a lot of labor and time,and quickly achieve the purpose of plugging the leak.
• The pipe repair clamp is suitable for hard and straight pipe.It is not suitable for soft and curved pipe.If the pipe is broken in two parts, it is also not suitable.And the steel plate of the pipe repair tool is specially treated to give it a bronze appearance,better performance and longer service life.
• NOTE:Please check the outer diameter of the leaking pipe, leakage area length and front-to-back distance,make sure you have enough space for the installation,this is very important.And make sure the surface of the pipe repair clamp is clean before using it.In addition,please tighten the bolts in symmetrical order to avoid damage to the rubber lining due to partial load.