Y&H 1000W Grid Tie Inverter Power Limiter DC25-60V Solar Input AC110V/240V Auto Switch

Additional Details from the Manufacturer

This item information is coming from the manufacturer. Some of the details may vary from the Nellis Auction listing. Please check the Quality Rating and Notes for information specific to this listing

More features

• 【Input Requirements】The Y&H grid tie inverter DC input 22-60V (startup voltage 26V), Voc (solar panel) must not exceed 60V to ensure good output efficiency, Please ensure that the solar panel power is not less than 200W and check the open-circuit voltage to be between 38-60V (Voc).
• 【Battery Power Supply】This DC 22-60V grid tie solar inverter can only be powered by 36V/48V batteries, and when using batteries, please use a circuit breaker, The inverter features a battery discharge power mode that can automatically adjust the depth of discharge for the battery bank.
• 【MPPT Technology】The inverter utilizes innovative MPPT technology with an efficiency of up to 99% and a peak conversion rate of 80%. It is necessary to use solar panels of the same specifications, and the inverter comes with a limiter sensor, providing only the power required for the load. The controller wiring should not exceed 66 feet.
• 【LCD Display】The LCD screen can display daily power generation, total power generation, real-time grid waveform, real-time solar system voltage and current, real-time power, internal temperature, date, and time. To meet higher power usage requirements, this grid-tie inverter can be stacked, for example, using 4 grid-tie inverters stacked equals 1000W, equivalent to 4000W, with no limit on the number of stacked units.
• 【Output Connection Precautions】This grid-tie inverter is only suitable for connecting to the grid output and cannot directly power AC loads. Ensure correct connection of positive and negative terminals and tighten the DC terminals of the inverter to avoid loosening and short circuits. Do not use the solar controller load port to connect to the inverter.