YWLRONG Watch Display for Fitbit Versa 4 Screen Replacement Touch Display Digitizer Assembly for Fitbit Versa 4 with Tools(Black)

Tips for screen replace: Before installation 1. Disconnect the battery cable before installation or make sure your Watch is powered off; 2. Make sure Watch has been upgraded to the latest version During installation 1. Please mark each screws place and put the screws you removed on the right place. Due to the different length and size of screws, if put them in wrong screw holes, they may damage the screen; 2. Treat flex cables gently, use tools instead of your finger; 3. Make sure the flex cable is properly connected .Don't force the connector together until they are properly lined up; After installation Reboot If you meet with some issues, please try this: Power off your Watch,disconnect all the cables including the battery cable,clean the connector on the motherboard,reconnect the cables, leave the phone alone for a while in a dry environment, a hard reset of your Watch,power on. If After installation display can’t touch well /Watch can’t unlocked/ has screen line.Please use the FPC connector to connect Main board again,make sure the connector was tight and connect on the right position. Package: 1* Watch Display Replacement for Fitbit Versa 4 1*Set Tools