puxyblue 2 Pack 8 3/8" Pool Light Lens Gasket and 4 Stainless Pilot Screw for Pentair 79101600Z 79104800 Compatible with Pentair IntelliBrite, AmerLite, and SAM Amerlite Lights

Additional Details from the Manufacturer

This item information is coming from the manufacturer. Some of the details may vary from the Nellis Auction listing. Please check the Quality Rating and Notes for information specific to this listing

More features

• 𝐑𝐢𝐬𝐤-𝐅𝐫𝐞𝐞 𝐆𝐮𝐚𝐫𝐚𝐧𝐭𝐞𝐞--𝐁𝐚𝐜𝐤𝐞𝐝 𝐛𝐲 𝟐-𝐲𝐞𝐚𝐫𝐬 𝐰𝐚𝐫𝐫𝐚𝐧𝐭𝐲 𝐟𝐨𝐫 𝐚𝐝𝐝𝐞𝐝 𝐩𝐞𝐚𝐜𝐞 𝐨𝐟 𝐦𝐢𝐧𝐝（𝐬𝐮𝐩𝐩𝐨𝐫𝐭 𝐫𝐞𝐭𝐮𝐫𝐧/𝐞𝐱𝐜𝐡𝐚𝐧𝐠𝐞）If you have any problems during guarantee period, please feel free to contact us via YOUR ORDER/ EMAIL / QA, We will reply to you within 24 hours. For whatever reason you are not satisfied, you can request 𝗮 𝗿𝗲𝗽𝗹𝗮𝗰𝗲𝗺𝗲𝗻𝘁 𝗼𝗿 𝗮 𝗿𝗲𝗳𝘂𝗻𝗱
• 𝐆𝐫𝐞𝐚𝐭 𝐕𝐚𝐥𝐮𝐞 𝐊𝐢𝐭 --Include 2 x Pool Light Gaskets and FREE 4 x Stainless Pilot Screw. 2 sets of replacement gaskets allow you to replace multiple gaskets at once or as a spare.You definitely don't want water in your pool light fixtures and these pentair gaskets are an inexpensive way to eliminate the most common cause of leaks. Fits like the original gasket at a much better price than other retailers. > If this screw is not suitable for your actual use, you can use the original screw
• 𝐅𝐮𝐥𝐥 𝐂𝐨𝐦𝐩𝐚𝐭𝐢𝐛𝐢𝐥𝐢𝐭𝐲 --Meets 8-3/8-inch size requirements.Exact replacements for Pentair part number 79101600Z/O-170 79101600 pool light seal gasket and 79104800 pool light screw. Perfect fit for Pentair (TM) lighting systems including Pentair IntelliBrite, Pentair Amerlite, and Pentair SAM Spectrum Amerlite lights. This pentair pool light gasket set is also compatible with AmerQuartz, HiLite, SAL Spectrum Aqualight, SpaBrite, SunBrite II, and SunGlow II
• 𝐒𝐨𝐥𝐢𝐝 𝐂𝐨𝐧𝐬𝐭𝐫𝐮𝐜𝐭𝐢𝐨𝐧 --Made of durable silicone material, effective against corrosion and leakage. Rubber material is more susceptible to aging. Silicone gaskets are designed by the manufacturer to use a compression seal, which allows the pool light to seal more tightly. > Remember to use no lubricant. That will only create a possible future water channel for a leak. Used pool light lens gasket to upgrade your spa and pool with low energy LED pool lights
• 𝐊𝐞𝐞𝐩 𝐃𝐫𝐲 𝐚𝐧𝐝 𝐒𝐞𝐜𝐮𝐫𝐞 --Installing a new light in the pool fixture means that it needs to be completely water tight. The pool light gasket for inground pool ensures a watertight seal. There's 110 volts of power exposed inside that fixture so there cannot be any water leaking through! > Replacing the bulb without replacing the pool light's gasket is a mistake. Every time you replace a bulb or remove a rubber ring/gasket, you must use a new one
• 𝐈𝐧𝐬𝐭𝐚𝐥𝐥𝐚𝐭𝐢𝐨𝐧 𝐓𝐢𝐩𝐬 --Disconnect the power supply before installation to avoid danger. Installation went better after seal warmed by the sun. Some compression required to seal, easier to install retaining screws evenly when seal is warm. The installation requires detailed attention to the proper seating of the seal and careful tightening of the clamp ring. To protect your light always check your seal before reinstalling by submerging in water with power off